鸭式布局飞机矢量喷流对地面效应影响的风洞试验

针对单发鸭式布局飞机，通过低速风洞试验，研究了矢量喷流对飞机地面效应的影响特性。研究结果表明：发动机喷流使得飞机的地面效应增强，升力系数增加，降低飞机起飞/降落时的飞行速度，缩短起降距离，从而改善飞机起降性能。发动机喷管上/下偏转时，矢量喷流对飞机上下表面气流诱导不对称，均使地面效应阻力系数增量减小。在此基础上，基于数值模拟结果对喷流与地面效应的相互作用机理进行了分析。     

高空发动机试车台矢量推力现场动态校准技术

根据发动机试车台矢量推力现场动态校准需求，通过系统化论证，针对试车台的技术要求及校准需求，解决发动机试车台现场实际使用和实验室校准条件不同造成的附加测量误差、试验台推力无法整体校准等问题。文中提出了利用摆锤式动态力加载装置实现标准矢量力加载的方案，为了验证设计方案的可行性，利用现有的设备研究验证校准方案，通过试验和分析给出了校准不确定度。结果表明：该方案动态性能优异，响应迅速，动态校准不确定度为2.2%，能满足高空发动机试车台矢量推力测试的需求，为后续进一步准确测试矢量推力提供了依据。     

基于定子电阻自适应辨识的感应电机死区补偿

电压源型逆变器由于死区效应,导致输出发生非标准化、畸变化,影响感应电机的控制精确度,特别是无速度传感器矢量控制,同时造成电网侧能量的流失。为了减小死区效应产生的影响,列出误差计算公式,求得总延时时间。另外,对定子电阻进行自适应辨识,增加所求延时时间精确度的同时可以运用到电机矢量控制中。经过补偿误差电压,提高了控制性能,降低了对控制系统的影响。结果表明所提补偿策略对电流波形、总谐波失真具有改善作用。     

某飞行器推力矢量试验测力装置研制

为满足某飞行器推力矢量试验的测试要求,采用两台六分量应变天平和一个空气桥组成测力装置来实现飞机全机气动力和喷管推进特性同时分别测量。基于有限元软件,对天平的应变及空气桥对天平的干扰进行了分析。结果表明:空气桥对天平力分量的干扰值优于5%,对力矩(滚转力矩除外)分量的干扰值优于15%,达到了设计指标。通过校准获得了单独天平、天平带空气桥(充压、不充压)状态下的校准公式,校准结果表明:两台天平各分量的综合加载误差均优于0.3%,天平带空气桥(充压、不充压)状态下各分量的综合加载误差优于0.5%,空气桥对天平的干扰量值与有限元分析结果一致。理论分析与实测结果证明:研制的天平及空气桥达到了预定目标,它的测量精准度高,满足推力矢量风洞试验需求。     

Robust model predictive control for satellite formation keeping with eccentricity/inclination vector separation

This study presents model predictive formation control based on an eccentricity/inclination vector separation strategy. Alternative collision avoidance can be accomplished by using eccentricity/inclination vectors and adding a simple goal function term for optimization process. Real-time control is also achievable with model predictive controller based on convex formulation. Constraint-tightening approach is address as well improve robustness of the controller, and simulation results are presented to verify performance enhancement for the proposed approach.     

Thrusting maneuver control of a small spacecraft via only gimbaled-thruster scheme

The thrust vector control (TVC) scheme is a powerful method in spacecraft attitude control. Since the control of a small spacecraft is being studied here, a solid rocket motor (SRM) should be used instead of a liquid propellant motor. Among the TVC methods, gimbaled-TVC as an efficient method is employed in this paper. The spacecraft structure is composed of a body and a gimbaled-SRM where common attitude control systems such as reaction control system (RCS) and spin-stabilization are not presented. A nonlinear two-body model is considered for the characterization of the gimbaled-thruster spacecraft where, the only control input is provided by a gimbal actuator. The attitude of the spacecraft is affected by a large exogenous disturbance torque which is generated by a thrust vector misalignment from the center of mass (C.M). A linear control law is designed to stabilize the spacecraft attitude while rejecting the mentioned disturbance torque. A semi-analytical formulation of the region of attraction (RoA) is developed to ensure the local stability and fast convergence of the nonlinear closed-loop system. Simulation results of the 3D maneuvers are included to show the applicability of this method for use in a small spacecraft.     

A boundary vector cell model of place field repetition

Hippocampal place cells are thought to form the neural substrate of a global cognitive map. However, in multicompartment mazes, these cells exhibit locally repeating representations, undermining the global cognitive map view of place cells. This phenomenon appears to be related to the repetitive layout of these mazes, but still no hypothesis adequately explains it. Here, we use a boundary vector cell (BVC) model of place cell firing to model the activity of place cells in numerous multicompartment environments. The activity of modeled place cells bears a striking resemblance to experimental data, replicating virtually every major experimental result. Our results support the BVC model and indicate that locally repeating place cell firing could result purely from local geometry.     

基于混合深度特征的红外目标抗干扰识别算法

复杂干扰条件下的红外空中目标识别技术是空战对抗领域的热点研究课题,复杂人工干扰严重遮蔽目标,导致目标特征的连续性与显著性遭到破坏,无法全面描述识别对象的特性,造成空中目标识别准确率下降。针对此问题,提出一种基于图像混合深度特征的空中目标抗干扰识别算法。首先,基于卷积神经网络进行图像深度特征的提取,将深度特征与梯度直方图(Histogram of Gradient, HOG)特征进行有效融合,构建混合深度特征。针对作战场景中的目标与干扰的对抗态势多样性,将支持向量机的二分类模型改进为三分类模型,对目标、干扰以及目标干扰粘连三种状态进行精确分类。实验结果表明：在复杂干扰环境下,基于混合深度特征的空中目标抗干扰识别算法正确率为92.29%,该算法可以有效地解决目标被干扰遮蔽、形成目标干扰粘连状态时的抗干扰识别问题。     

面向一体化计算的整体式液体冲压发动机建模及性能评估

为发展冲压发动机性能工程预估方法,建立了面向一体化计算的整体式液体冲压发动机性能计算模型,并使其兼容基团贡献算法,提高了拓展性。利用模型分析了冲压发动机在攻角0°～6°、高度0～18km、马赫数2.0～3.5、余气系数1.0～2.9范围工况多维度连续变化下,比冲、推力系数和燃油质量流量的速度-高度特性、高度-节流特性、节流-速度特性以及攻角特性。研究结果表明:性能计算模型可在一体化计算条件下、基团贡献算法允许范围内,不依赖试验数据对冲压发动机性能预估,计算结果与技术参考值相比相对误差均小于14%。推力系数和比冲具有基本一致的速度-高度特性和相似的高度-节流特性,受燃气组分影响,推力系数和比冲的节流-速度特性差异明显。燃油质量流量的变化规律不同于比冲和推力系数,在进入平流层后呈现折缓趋势,而呈现连续性,速度越大、高度越低、余气系数越小,燃油质量流量越高,反之则越小。引入攻角以后,攻角越大,比冲和推力系数越低,进气道起动马赫数越高;攻角-起动马赫数曲线小范围内近似线性,攻角超过5.6°非线性加剧。     

推力室状态对其声学振型及其阻尼特性的影响

为确定工程中冷态条件下获得的推力室声学特性能否表征真实条件下的声学特性,研究了冷态无流动、热态气相流动和湍流两相燃烧三种状态下推力室声学振型及其阻尼特性。在推力室稳态流场中的有限区域施加数值定容弹,激发其具有多模态声学振型的大幅值压力振荡,采用衰减时间和半带宽来定量评价所激发的不同声学振型压力振荡衰减快慢,进而获得其阻尼特性。在相同过载比的数值定容弹激励下,在冷态条件下能激发包含更多声学振型压力振荡,且该振荡衰减时间更长,相同振型压力振荡衰减比热态条件下慢。在冷态条件下,一阶切向振型振幅最大,为最容易被激发声学振型;一阶纵向振型半带宽最小,为最难衰减的振型。在热态条件下,一阶纵向振型为最容易激发声学振型,也为最难衰减声学振型。从所激发的主要振型及其相对衰减的快慢来看,冷态条件下获得的声学特性能够表征真实条件下的推力室的声学特征。